TS-SER1
From embeddedTS Manuals
 | |
| Product Page | |
| Documents | |
|---|---|
| Schematic |
Overview
The TS-SER1 is a daughter card that features a PC/104 connector/bus and provides a standard 16550-compatible RS-232 serial port through a 10-pin header.
Features
- 1 PC/AT Serial COM Port
- COM port can be configured as COM3, COM4, or COM5
- Jumper configurable IRQ (IRQ 4,5,6,7,9 available)
- 16550 type UART with 16 byte FIFOs
- Up to 115.2Kbaud
- RS-232 output uses standard 10 pin header
- Dimensions: 3.5 inches x 1.4 inches
- Power requirements: nominally 20mA @ 5V
- PC/104 compatible
- Extended Temperature ( -40° to +85°C ) model available
Getting Started
See your SBC's PC104 section for information on the ISA 16550 driver and getting a connection to the COM device.
COM/IO Selection
| COM | Address |
|---|---|
| COM3 | 3E8 |
| COM4 | 2E8 |
| COM5 | 3A8 |
Pin Outs
| Pin Number | Signal Name |
|---|---|
| 1 | DCD |
| 2 | Receive Data |
| 3 | Transmit Data |
| 4 | DTR |
| 5 | Signal Ground |
| 6 | DSR |
| 7 | RTS |
| 8 | CTS |
| 9 | RI |
Usage with 3rd party devices
Please note that while efforts are made to follow the PC/104 specification this peripheral is not tested with third party SBCs or connected peripherals. This card is not guaranteed to operate as intended when third party PC104 peripherals or SBCs are connected.