TS-8554-4400

From embeddedTS Manuals
WARNING: This manual is incomplete and is subject to change without notice while the TS-4400 and associated companion products are in development.
TS-4400
Product Page
Documentation
Processor
300 MHz
Vortex86EX
X86 Architecture
Processor Page

Overview

Getting Started

Connect USB Console

Powering up

Boot Sequence

BIOS

Technologic Systems uses a combination of Coreboot and SeaBIOS provided from the CPU manufacturer to bootstrap into FreeDOS. Unlike many BIOS solutions, this system has no peripheral settings that require customization, allowing the downstream developer to move more directly into product development.

Backup / Restore

Creating A Backup or Production Image

Restoring An Image

Cross Compiling and Development

Accessing The FPGA

FreeDOS Development

FreeRTOS Development

Features

Battery Backed RTC

CPU

GPIO

The TS-4400 provides 69 FPGA-Based GPIO to the TS-8554 baseboard. The table below provides the DIO number associated with the DIO memory registers, the pin's primary function, and the pin's endpoint location on the TS-8554 baseboard. TODO: Add electrical characteristics such as inout, voltage, and max sink/source to this table. TODO II: Delete CN1 location information.

DIO_# FUNCTION TS-8554 PIN CN1 LOCATION
0 GPIO BUF_LCD_06 93
1 GPIO BUF_LCD_05 91
2 GPIO BUF_LCD_03 89
3 GPIO ISA_14.3 MHZ 87
4 GPIO WIFI_RXD 85
5 GPIO BD_ID_DATA 83
6 GPIO ISA_RESET 81
7 GPIO EN_NIMBEL_4V 79
8 GPIO EN_NIMBEL_3.3V 77
9 GPIO PUSH_SW# 73
10 GPIO WIFI_TXD 71
11 GPIO IO16# 69
12 GPIO TX_EN_485 67
13 GPIO WIFI_IRQ# 65
14 GPIO ISA_IOR# 63
15 GPIO ISA_IOW# 61
16 GPIO PORT_1_CLK 59
17 GPIO ISA_IORDY 97
18 GPIO ISA_BHE# 99
19 GPIO ISA_CS# 100
20 GPIO ISA_DIR 98
21 GPIO ISA_ALE 96
22 GPIO ISA_DATA_00 94
23 GPIO ISA_DATA_01 92
24 GPIO ISA_DATA_02 90
25 GPIO ISA_DATA_03 88
26 GPIO ISA_DATA_04 86
27 GPIO ISA_DATA_05 84
28 GPIO ISA_DATA_06 82
29 GPIO ISA_DATA_07 80
30 GPIO ISA_DATA_08 78
31 GPIO ISA_DATA_09 76
32 GPIO ISA_DATA_10 74
33 GPIO ISA_DATA_11 72
34 GPIO ISA_DATA_12 70
35 GPIO ISA_DATA_13 68
36 GPIO ISA_DATA_14 66
37 GPIO ISA_DATA_15 64
38 GPIO DIO_SPI_CLK 60
39 GPIO DIO_SPI_MOSI 58
40 GPIO MIKRO_SPI_CLK 23
41 GPIO ISA_ADD_08 24
42 GPIO ISA_ADD_09 26
43 GPIO DIO_SPI_MISO 48
44 GPIO ISA_BCLK 21
45 GPIO MIKRO_RESET# 37
46 GPIO WIFI_MISO 39
47 GPIO MIKRO_SPI_MOSI 25
48 GPIO MIKRO_SPI_MISO 27
49 GPIO MIKRO_SPI_CS# 31
50 GPIO MIKRO_PWM 33
51 GPIO MIKRO_INT 35
52 GPIO WIFI_32KHZ 41
53 GPIO WIFI_CTS 43
54 GPIO LCD_DATA_LK 45
55 GPIO WIFI_MOSI 49
56 GPIO EN_NIM_USB# 51
57 GPIO WIFI_CLK 53
58 GPIO WIFI_CS# 55
59 GPIO PORT_0_CLK 57
60 GPIO vortex_gp81 & fpga 28
61 GPIO PC104_IRQ5 30
62 GPIO PC104_IRQ6 32
63 GPIO PC104_IRQ7 34
64 GPIO DIO_5 38
65 GPIO DIO_7 40
66 GPIO DIO_9 42
67 GPIO DIO_11 44
68 GPIO COM1_CTS_3V 46

ADC

Ethernet Port

FPGA

FPGA Registers

FPGA Syscon

Interrupts

LEDs

Sleep

SPI

TS-SILO Supercapacitors

XXX TODO: This section needs a generic graphic or one dedicated to the TS-4400.

UARTs

USB

XXX TODO: Is this a duplicate of section 7's USB section?

Watchdog

Specifications

Power Input Specifications

Power Consumption

Power Rails

MicroSD Connector

MicroUSB Connector

Power Connectors

USB Ports

Revisions and Changes

FPGA Changelog

Microcontroller Changelog

PCB Revisions

Software Images

Product Notes

FCC Advisory

This equipment generates, uses, and can radiate radio frequency energy and if not installed and used properly (that is, in strict accordance with the manufacturer's instructions), may cause interference to radio and television reception. It has been type tested and found to comply with the limits for a Class A digital device in accordance with the specifications in Part 15 of FCC Rules, which are designed to provide reasonable protection against such interference when operated in a commercial environment. Operation of this equipment in a residential area is likely to cause interference, in which case the owner will be required to correct the interference at his own expense.

If this equipment does cause interference, which can be determined by turning the unit on and off, the user is encouraged to try the following measures to correct the interference:

Reorient the receiving antenna. Relocate the unit with respect to the receiver. Plug the unit into a different outlet so that the unit and receiver are on different branch circuits. Ensure that mounting screws and connector attachment screws are tightly secured. Ensure that good quality, shielded, and grounded cables are used for all data communications. If necessary, the user should consult the dealer or an experienced radio/television technician for additional suggestions. The following booklets prepared by the Federal Communications Commission (FCC) may also prove helpful:

How to Identify and Resolve Radio-TV Interference Problems (Stock No. 004-000-000345-4) Interface Handbook (Stock No. 004-000-004505-7) These booklets may be purchased from the Superintendent of Documents, U.S. Government Printing Office, Washington, DC 20402.

Limited Warranty

See our Terms and Conditions for more details.