The TS-8100 includes 3 2x5 0.1" pitch COM headers that feature RS232, RS485, and CAN ports. These follow a different pin layout which corresponds with a standard 10 pin header standard for UARTs. The RC-DB9 is available to convert these ports to a DB9.
Pinout
|
Header
|
|
|
|
|
|
- ↑ This header is brought out to both a 2x10 header and a #DB9.
- ↑
CONSOLE RS232 RXD with "Console Enable" jumper on or XUART1 RS232 RXD with "Console Enable" jumper off
- ↑ CONSOLE RS232 TXD with "Console Enable" jumper on
or XUART1 RS232 TRXD with "Console Enable" jumper off
- ↑ 4.0 4.1 The second RS485 transceiver requires OP-CAN2-485 to be ordered with the board
- ↑ 5.0 5.1 This is an RS485 port with RX only
- ↑ 6.0 6.1 6.2 6.3 The second CAN transceiver requires OP-CAN2-485 to be ordered with the board