The TS-8100 includes 3 2x5 0.1" pitch COM headers that feature RS232, RS485, and CAN ports. These follow a different pin layout which corresponds with a standard 10 pin header standard for UARTs. The RC-DB9 is available to convert these ports to a DB9.
Pinout
|
Header
|
|
|
|
|
|
- ↑ This header is brought out to both a 2x10 header and a #DB9.
- ↑ 2.0 2.1 Toggle with xuart0_on and xuart0_off
- ↑
CONSOLE RS232 RXD with "Console Enable" jumper on or ttymxc1 RS232 RXD with "Console Enable" jumper off
- ↑ CONSOLE RS232 TXD with "Console Enable" jumper on
or ttymxc1 RS232 TRXD with "Console Enable" jumper off
- ↑ 5.0 5.1 The second RS485 transceiver requires OP-CAN2-485 to be ordered with the board
- ↑ 6.0 6.1 Toggle with xuart4_on and xuart4_off
- ↑ 7.0 7.1 Toggle with xuart3_on and xuart3_off
- ↑ 8.0 8.1 This is an RS485 port with RX only. This port can be enabled with xuart0_on. This also must be remapped from COM1 with "peekpoke 16 0xb0010016 0x1023"
- ↑ 9.0 9.1 9.2 Toggle with xuart5_on xuart5_off
- ↑ 10.0 10.1 The second CAN transceiver requires OP-CAN2-485 to be ordered with the board