Modbus TS1420 manager
From embeddedTS Manuals
Modbus Windows program: TS1420Manager
These programs are used to operate the functionality of the TS-1420
- Use of this utility requires the following steps:
- 1. Select the COM port from the drop down box
- 2. Select the bit rate from the drop down box
- 3. Select the data format (8N1 is default)
- 4. Enter the connected device slave address after selecting the format (Hex or Decimal)
- 5. Select the proper ADC sample size
- 6. Select or set the desired [ercentage of PWM operation per channel
- 7a. Click the Set button to set the ADC and PWM values
- 7a. Alternately click the Read button to read the current values
- 8. Clicke the update button to display the per channel voltage and current and display the calculated power