U-boot release date
|
Changes
|
Jul-22-2014
|
|
Sep-24-2014
|
- Instead of pressing any key during startup, now it requires Ctrl+C. This is to prevent any serial noise from stopping the board in u-boot.
- The board will now attempt to load /boot/boot.ub before continuing. This is intended for booting environments like QNX, android, and more that cannot use the standard boot arguments.
|
Nov-06-2014
|
- Updated ddr calibration for new build (TS-4900 solo 800MHz industrial temp 1GB RAM)
- Enabled usb 5V by default for usb boot mechanism
|
Nov-19-2014
|
- Updated to U-boot 2014.10 (from 2013.10)
- Functionally the same
- Included android boot image support
- Included fastboot support
- SATA boot fixes
|
Dec-01-2014
|
- Added bbdetect command to 2014.10
|