TS-4900 U-boot changelog: Difference between revisions

Revision as of 12:00, 5 December 2014

U-boot release date	Changes
Jul-22-2014	Initial Release
Sep-24-2014	Instead of pressing any key during startup, now it requires Ctrl+C. This is to prevent any serial noise from stopping the board in u-boot. The board will now attempt to load /boot/boot.ub before continuing. This is intended for booting environments like QNX, android, and more that cannot use the standard boot arguments.
Nov-06-2014	Updated ddr calibration for new build (TS-4900 solo 800MHz industrial temp 1GB RAM) Enabled usb 5V by default for usb boot mechanism
Nov-19-2014	Updated to U-boot 2014.10 (from 2013.10) Functionally the same Included android boot image support Included fastboot support SATA boot fixes
Dec-01-2014	Added bbdetect command to 2014.10
Dec-05-2014	Ignored RPCERRORs from the UMNTALL RPC call after an NFS transaction. Not all nfs servers implement this and it should not invalidate the file transfer since it is just for state tracking on the server.

@@ Line 29: / Line 29: @@
 |
 * Added bbdetect command to 2014.10
+|-
+| [ftp://ftp.embeddedarm.com/ts-socket-macrocontrollers/ts-4900-linux/u-boot/ Dec-05-2014]
+|
+* Ignored RPCERRORs from the UMNTALL RPC call after an NFS transaction.  Not all nfs servers implement this and it should not invalidate the file transfer since it is just for state tracking on the server.
 |}