TS-4900 U-boot changelog: Difference between revisions

From embeddedTS Manuals
(Created page with "{| class=wikitable |- ! U-boot release date ! Changes |- | [ftp://ftp.embeddedarm.com/ts-socket-macrocontrollers/ts-4900-linux/u-boot/ Jul-22-2014] | * Initial Release |- | [...")
 
No edit summary
Line 12: Line 12:
* Instead of pressing any key during startup, now it requires Ctrl+C.  This is to prevent any serial noise from stopping the board in u-boot.
* Instead of pressing any key during startup, now it requires Ctrl+C.  This is to prevent any serial noise from stopping the board in u-boot.
* The board will now attempt to load /boot/boot.ub before continuing.  This is intended for booting environments like QNX, android, and more that cannot use the standard boot arguments.
* The board will now attempt to load /boot/boot.ub before continuing.  This is intended for booting environments like QNX, android, and more that cannot use the standard boot arguments.
|-
| [ftp://ftp.embeddedarm.com/ts-socket-macrocontrollers/ts-4900-linux/u-boot/ Nov-06-2014]
|
* Updated ddr calibration for new build (TS-4900 solo 800MHz industrial temp 1GB RAM)
* Enabled usb 5V by default for usb boot mechanism
|}
|}

Revision as of 10:38, 6 November 2014

U-boot release date Changes
Jul-22-2014
  • Initial Release
Sep-24-2014
  • Instead of pressing any key during startup, now it requires Ctrl+C. This is to prevent any serial noise from stopping the board in u-boot.
  • The board will now attempt to load /boot/boot.ub before continuing. This is intended for booting environments like QNX, android, and more that cannot use the standard boot arguments.
Nov-06-2014
  • Updated ddr calibration for new build (TS-4900 solo 800MHz industrial temp 1GB RAM)
  • Enabled usb 5V by default for usb boot mechanism
Retrieved from "http://docs.embeddedTS.com/index.php?title=TS-4900_U-boot_changelog&oldid=5966"